Screen: ShopSite > Commerce Setup > Shipping > UPS
Note: |
If you have not previously configured UPS shipping, you will be required to Register for UPS Shipping before seeing this screen.
|
Use the fields on this screen to select the UPS services that you want to offer your customers and to configure additional UPS shipping options. You must also configure ShopSite to use state and country pull-down lists on the States and Countries screen.
When obtaining UPS shipping rates for an order, ShopSite uses some default settings that are correct for most orders. UPS charges may be higher if an order does not meet these qualifications:
Note: |
When using a real-time shipping quote service, you should also set up a simple shipping table (such as Flat Shipping) to use as an alternate in case of a time-out waiting for the real-time quote provider. The simple shipping rate will be displayed, even when real-time shipping rates are available, so you should name and set your rates in an appropriate manner.
|
UPS Services |
|||||||||
Select UPS Services |
Check the UPS shipping services that you want to offer to your customers. Note that not all services are available for all destinations. For example, you cannot use UPS Ground to deliver a package from the U.S. mainland to Hawaii. The UPS system will compare the store location with the customer’s shipping address and only display charges for services that are actually available. |
||||||||
UPS Delivery |
|||||||||
Residential or Commercial |
Select Residential Delivery if the majority of your shipments go to residential addresses. Select Commercial Delivery if most of your shipments are delivered to businesses. UPS rates are slightly higher for residential delivery. |
||||||||
UPS Pickup Types |
|||||||||
Select UPS Pickup Type |
Select the method that you use for UPS pickups. Some pickup methods are more expensive than others. Options may include: Daily Pickup, Customer Counter, One Time Pickup, On Call Air, and Letter Center. |
||||||||
UPS Shipping Rates |
|||||||||
Select Shipping Rates |
Select the method to use for determining shipping rates. Some methods are more expensive than others. Options may include: Retail Rates, Daily Rates, Standard List Rates, and Account Based Rates. You also have the option of adjusting the rates before they are displayed to the customer by selecting the check box and providing + or - a particular percentage. |
||||||||
UPS Address Validation |
|||||||||
Use UPS Address Validation |
Check this box to use UPS Address Validation to ensure that the shipping address information entered by customers is consistent. This does not check that the address actually exists, but that the city, state, and ZIP code all match. All combinations of city, state and ZIP code must be for addresses within the United States. All other addresses are assumed to be okay.
|
||||||||
Display Error Details |
Only check this box if you or your customers are experiencing problems with UPS Address Validation. Checking this box will cause ShopSite to display an error screen to the customer when there is a problem with address validation. Note that an invalid address is not an error, and that Address Validation will always display a message and recommend address changes if the address entered is invalid. |
||||||||
Maximum Package Weight |
|||||||||
Maximum weight per package (up to 150 lbs.) |
et the maximum weight that you will put in each box that you ship. (Note that you must use the same unit of measure throughout your store, either pounds or kilograms.) If the combined weight of all products in an order exceeds this weight, ShopSite will charge for multiple boxes. This value should be at least as large as the weight of the heaviest product that you sell. |
||||||||
Minimum Order Weight |
|||||||||
Use minimum order weight if total order weight is less |
Check this box and enter a minimum weight to have ShopSite use the minimum order weight if the combined weight of all products in an order is less than the minimum specified. |
||||||||
Missing Product Weight |
|||||||||
E-mail alert settings |
Click on Change to configure missing product weight E-mail settings. A pop-up window will open and let you set the following options:
|
||||||||
Use minimum product weight |
Check this box and enter a minimum product weight to have ShopSite charge shipping based on the minimum product weight for all products that have no weight defined. |
||||||||
Time-out |
|||||||||
Number of seconds to wait for a response from UPS before informing the customer |
Use the dropdown menu to select the number of seconds ShopSite should wait for a response from UPS for a returned rate. Defaults to 15. |
||||||||
Customer Messages |
|||||||||
Header for Error Messages |
Enter a description for the UPS error messages that will be displayed to the customer. |
||||||||
No UPS server response |
Enter a message that you want customers to see when the UPS server does not respond after ShopSite requests shipping charges for an order. This should be a very rare occurrence. |
||||||||
No UPS service for shipping address |
Enter a message that you want customers to see when there is no UPS service available for the shipping address. For example, if you have only enabled UPS Ground and the customer enters a shipping address that requires air delivery, this message would be displayed. |
||||||||
Buttons |
|||||||||
Click this button to view your UPS User ID, password, and Access License key. |
|||||||||
Click this button to see a list of products in your store that have a weight of zero. Products with zero weight will not incur the correct shipping charges. In most cases, you should define a real weight for each product. |
|||||||||
Click this button to go through the UPS registration process again. You should re-register if you need to change your store’s address or other information. |
|
ShopSite Help and Resource Center Last updated: March 01, 2010 Give Feedback |
ShopSite Shopping Cart Software |